BPT-L19 BPT-L19 BPT-L19 BPT-L19 BPT-L19 BPT-L19 BPT-L19 BPT-L19 BPT-L19
BPT-L19

BPT-L19

BPT-L19

Signode
Price: $4,199.00
  • $4,199.00

In Stock


Available Options

BPT-L19


  • Secure Transaction

Signode BPT-L19 Battery Powered Push Style Combination Tool


Expected battery powered tensioner release Q4 2022 - Q4 2023


The Signode BPT-L19 is a single reverse notch sealer used with regular duty or high tensile steel strapping, and recommended for use on round or irregular loads. Weighing 10 pounds (half a pound more than the pneumatic PNSC2), the BPT-L19 tool uses its duck bill nose to push the seal, a feedwheel to pull tension, and jaws to notch the seal in a full combination action. The BPT-L19 applies up to 674 lbs. tension to steel strapping. The BPT-L19 is a relatively easy tool to operate thanks to the two bottom control system. The strap easily slides out after each strapping cycle. The touch screen allows you to change the tension settings, or to switch between manual and automatic.





The BPT-L19 is available in three sizes: 

BPT-L13: 1/2" (12.7mm) x 0.015-0.024" Seal .5 Inch Push Seal 

BPT-L16: 5/8" (15.9mm) x 0.015-0.024" Seal .625 Inch Push Seal 

BPT-L194: 3/4" (19.0mm) x 0.015-0.024" Seal .75 Inch Push Seal  

Signode BPT-L19 parts will soon be loaded onto the order parts tab of this page for replacement parts.


Versatility:

How to Strap with the BPT-L19: While operating any strapping tool, safety precautions must be taken. Safety goggles and hand protection must be used and careful distance from the tool and the cargo must be maintained. First, thread the strap through the seal and wrap the strap around the load. Remove excess slack and pull opposite end back through the seal over top of the original strap. Hold the BPT-L19 in right hand and the strap in the other. Use the lever to lift the foot and slide the strapping in. Slide the tool forward as far as possible to ensure tight tensioning. Press the button to start tensioning. Once desired level is reached, the tool will automatically shut off. Press the sealing button to compete the sealing function until the tool automatically stops the sealing process. 

   


For use with 1/2"-3/4" (16 mm-19 mm) x .015"-.024" Apex Plus or Magnus strapping 

Tension:  674 pounds

Joint type: Single reverse notch 

Weight: 10 lbs. (4.5 kg)



Allstrap Opinion:

The BPT-L19 tool is expected to release in the middle or end of 2022 and we are excited to see it. Full review coming soon.


Do you have a picture or video of this BPT-L19 battery tool?  We would love to buy them from you, please contact us.