P328 P328 P328 P328 P328 P328 P328 P328
  • $2,910.00

In Stock

Available Options

  • Secure Transaction

Fromm's P328 Battery Powered Tool for Poly Strapping

A new version is available, the P328S (click to link).  The S has a screen instead of buttons, and also allows auto mode for strapping.  There is a full comparison of the P328 to the P328S in the video below.

The Fromm P328 Battery Operated Power tool is for Polyester strapping and is the toughest strapping machine yet. To make the best use of its capabilities in your packaging area, the Fromm P328 battery powered tool has all new interactions and technologies. They let you strap things more quickly and conveniently, including things that simply weren’t possible before. Using it is a whole new experience.

The P328S uses the same mechanical parts as the P328, but the 328S has a touchscreen.  The P328 is a very tough tool, if you want the ability to use the tool in auto mode, you should look at the P328S.  Auto mode means with one button push, the battery tool will pull tension, then automatically switch to weld and cut.  The P328 has two buttons, one for tension, and the other for weld/cut.  If your tension requirements change frequently, auto mode is not important.  If your doing the same bunk or skid all day, auto mode is a great improvement.  We were initially reserved  about recommending the P328S, but the touch screen has been very tough, and we have not broken any.  Both are great tools, and the same cost.  As of October 2019, I prefer the P328S over the P328.

> An incredibly easy to use bander. High-quality battery strapping tools have long been defined by their ability to move around the plant, and the P328 is no exception. With Allstrap’s available exclusive 5 amp hour batteries, you get more run time between charges. Combining the 18 volt lithium battery with a powerful and efficient brushless motor means the P-328 Fromm battery will last all shift, and maybe all week.

>Entirely new ways to strap. Fromm P328 makes all the ways you’re used to banding more convenient. With its new single base, it can slide off much easier and be removed from round and small packages. Similar tools applied to a 24” round bunk would get stuck.  The base under the feedwheel could not open, making it impossible to remove the tool. But now, the single base slides out of tight spots that were impossible before! Cycling the tool is easier, too.  Pressing the tension button will pull the bundle tight, and releasing at set tension automatically kicks the P328 into weld and cut.  There is no longer a lever, and the second button is only used in manual mode.

> Maximize safety by minimizing mistakes. We believe the tool should keep the operator from making mistakes, and the P328 is the first generation of battery tools that does just that. The weakest spot on the strap loop is the weld, so it is critical to make the weld as strong as possible. Welded joint efficiencies from 75-90% are typical with good strapping, and this tool finally keeps operators from messing it up!  The welding mechanism is now controllably its own motor, making sure the weld cools every time.

> Find your complementing tool for other widths

5/8”-3/4” P329

1”-1.25” P331 

1"- 1.25" Pneumatic P359

Tool Repair:

Need your P328 Tool Repaired? Send it to our tool repair department for a quick turnaround. 


The New Fromm P328

Fromm p326 p327 p330 vs. p328 p329 p331

How to operate the Fromm P328 strapping tool

P328 Plastic Strapping Tool

Fromm P328 vs P328S tools compared

Related Products